1 January

New addition to my Etsy shop!

I now have two offerings for sale as patterns.

The hand stitching cord pattern as printable sheets with instructions

https://www.etsy.com/listing/216457953/cording-pattern-for-padme-purple-senate?ref=shop_home_active_1

And Midna has been updated to include skirt design patterns.

https://www.etsy.com/listing/189726777/midna-cloak-instructions-patterns-and?ref=listing-shop-header-1

25 November

Arwen Chase Dress

Posted by in cosplay, costumes | No Comments

Following various online sites for the “Chase Dress” from Lord of the Rings, I have mostly finished my grey leather Arwen costume.

arwen1

 

I have a new costume I can literally throw on at a moments notice (yay) with minimal extra stuff.

Site resources: http://www.costumersguide.com/chase.shtml

This site had I think the most helpful photos. The movie is over ten years old now??? and some of the other sites had links to images on other pages that  no longer exist.

http://leavesoflorian.blogspot.com/2013/02/arwens-chase-dress-lord-of-rings.html

This one is also full of embedded photos, but I didn’t always find it again when I googled the dress.

http://www.alleycatscratch.com/lotr/Elf/Arwen/Chase.htm

This page was most helpful with pattern suggestions.

I started with seven goatskin hides. They’re the right color but I mistakenly thought they were suede, which is what I really needed. In the end though, I really like the goatskin finish, even though they’re white on the insides of the skins.  The ebay price was very good too – I couldn’t find ‘dove grey’ suede leather, and when I could, it was outrageously priced or far too thick. So this ended up being a really good compromise between settling for microsuede fabric and going for using all leather.  I used 4 full skins for the skirts, which overlap very nicely and are full. 1 skin went to the sleeve bottoms, which are huge, and the other skins were enough for the bodice and upper arms. I had to re-cut one upper sleeve because the embroidery didn’t work out the way I wanted. It’s still hard to tell exactly how the design was done on the sleeves, but I’m happy with the machine embroidery, and it didn’t give me an issue with the leather. The bodice is unlined, but I’m considering either lining it or finding another way to reinforce the leather so it won’t stretch over time. I think I already have to take it in a bit.

Yesterday I re-hemmed the goldish sleeve material and fray-checked it. I glued down the inside of the sleeve material and trimmed it up – which is blue microsuede cut from a thrift store shirt. I trimmed down my ears yesterday too, so they should sit better next time. I still don’t have my 3D printed belt buckle, so it looks like I’ll just be making it out of worbla or wire reinforced sculpey. The last bit is baseball stitching the seams, but I don’t like the way I’ve started them. The good news is, this leather has been surprisingly forgiving of oopsie needle punches.  I’m not entirely sure why the bodice pulls so much on the side near the arm scythe, so I’ll have to see if that’s fixable.

I think I’m planning on removing the front zipper entirely and replacing it with hand sewn in hooks and eyes. I don’t like that the zipper is somewhat visible, and that there’s a line of top stitching that is visible at the front.

The collar is still kind of crazy and needs adjustment.  I should have done a pattern test on the collar, but alas, I did not.

I will probably not be offering this as a possible commission.  The leather is too hard to find.

If we ever go back to New Zealand, I’m totally bringing this along.

 

10 November

Coming soon: A larger workshop

Posted by in cosplay, costumes | No Comments

Yaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaay

We just bought a house, and it’s going to have a two-car garage, potential backyard space for a workshop shed and my sewing area will be doubled. We’ll finally have a room we can put all his grandparent’s antiques in and not leave them somewhere and hope they don’t get scratched.  The house will be built to the design we want, and will be ready in a few months.  Which means we have to move again.

Hubby’s working on a large vacuum former, which right now is taking up a lot of space in our rental place, but soon things will be changing. We’re one big step closer to renting out our original home after this weekend.  In the mean time, we’re plotting up next DragonCon’s costume line up. I think the bug finally bit my husband and now he’s eager to put his workshop skills and tools to use on some fun projects.

This year, we went as our first ‘paired’ costume set, Rocket(te) and Groot. By DragonCon next year, we’ll likely again be Upgraded (fursuit)Rocket and (latex)Groot, some D&D characters from the cartoon back in the day, and a RIFTS duo.  His costume, I think is secret for now, so I’ll just say I’m starting plans for making myself a Lay-line Walker and leaving it at that.  My purple padme gown will make four costumes, and hopefully by then I’ll be in shape to wear Cursed Midna again, making that more or less my costume limit, allowing for one surprise outfit of some kind, maybe. I’m finding myself just not wanting to change all that often anymore.  I’m having more fun wearing a well-made costume ‘all day’ rather than switching out to something I haven’t spent as much time on.

Poking around for Rocket Racoon reference images, I think this is my favorite thing that showed up. (artist and original comic book unknown)

2941191-rocket_raccoon_4

4 November

Fabric find!

Posted by in cosplay | No Comments

I’m now sure that I can finish Padme’s Purple Senate gown.

coat_fabric

Now I just have to find out what kind of dye to use.

purple9

Hehehehehehehe

15 October

Arwen Buckle Update #2

Posted by in 3D, Art, costumes | No Comments

Had to finagle the design some – my ‘leaves’ were too thin to properly 3D print, so I selected out the leaves and thickened them. I added more posts, and made them all the same height to help with printing.  I pulled out the back of the design a bit too, since the buckle frame was curved inside itself a little, cupping inward from the back. I brought it out to strengthen the frame.

We’ll see if it works this time.

 

belt buckle2

21 September

Another promotional poster

Posted by in Posters | No Comments

Liz_Leia_BRBWaiting for final Legion approval on this one, but it should be alright.  Our base membership is.. well, kinda dismal and we’re looking for more members. We only have about a dozen costumers to call on across the state, and not everyone can always take time off to volunteer.

 

21 September

Blue Ridge Base takes Costumer of the Year for 2013

Posted by in Art, cosplay, costumes | No Comments

Lizwinner copy

Photo by Ripptowne Photography

This is Liz Welsh, a member of Rebel Legion in our Blue Ridge Base of the North and South Carolinas division. I was base commander when her award came through and I was honored to present it to her in a special ceremony/gathering.

Congrats, Liz, and thanks for being a valued member of Rebel Legion!

8 September

DragonCon 2014

This was possibly our most successful DragonCon to date. Last year was much more hectic and stressful, but despite managing 7 costumes and making last minute hot glue gun repairs in our room, we had a great time.  My husband and I and a good friend all made it to the giant 600 person Marvel Photoshoot and we had a blast.

10603626_10102092640708159_159970933325165785_n 10440672_10102084717461409_689396864931931447_n

 

We are planning improvements to next years ‘Guardians” group.  My green friend there put her outfit together last minute and rounded up our Ronan and Star Lord. I’m going to update to a full or partial fur suit, and Groot will be updated with an internal cooling system, a better paint job and longer legs.  My husband survived his first full body suit experience quite well, and still give tons of “Groot Hugs” on the way back to the hotel room when by all rights, he should have been exhausted.

The rest of my costumes went over pretty well, but none of them were really meant to be amazing this year.  Mara was a repeat and my lightsaber only lit up half way. I thought I’d forgotten ALL my wigs, my Zelda crown crumbled in my hands and my bow got tangled in some chick’s armor and pulled it apart. I almost lost my friend’s elf ears, and Catra wasn’t done before Sunday night. At DragonCon. I forgot hubby’s green belt for his Jedi, and I couldn’t find my other silver glove for this photoshoot.  The only costume that worked 100% correctly was Ginger from Legend of Korra, and now I want to go back and shorten the skirt.  Oh well.  Other than costume malfunctions, it was a great weekend.

This was the first year I didn’t paint myself blue at all either.

We’re already talking about next years group plans, and roping more people into them, so we’ll see how it goes.

27 August

Costume updates! Groot!

Posted by in Art, cosplay, costumes | No Comments

Groot2

Groot mask/head that I’m making for my hubby so he can be Groot for DragonCon.  The suit is more or less done, he just needs to make his stilts for the damn thing.  I have one more step with the mask, which is to add a brown or black cloth for the neck, do something for the eyes and add the green tree flocking to the face and chest plates.

Mask and plates are carved from EVA floor tile foam with a Dremel and sanding bit.

I’m ridiculously excited with how this is coming out.  I haven’t had this much fun working on my own costumes in quite a while. Rockette is going to be a blast too.  This will be our first ‘duo’ costume with myself and my husband, and it’ll be his second costume.  The first one I made him was “Corran Horn” and I still gotta get him approved with Rebel Legion but I keep putting off taking the photos.  I have five Rebel Legion costumes approved for myself.

 

24 August

New 3D print object

Midna_PendantFinally started True Form Midna’s forehead pendant thing. I think I’m going to chop off the head of the bird/snake thing and start over- it’s lumpy and I don’t like it.  Once I fix or re-do the head, I’ll mirror it and adjust the crossings. The final product should be around 3 inches long at most.  It’s kinda big but not super big.

A friend of mine who I hope will be a co-worker soon just got a Maker Bot 3D printer.  Ours isn’t up and running yet, and she’s offered to test print some things for me, possibly helping me sell some items too.  Hers can only handle stuff up to around 4 inches by 4 inches, but that’s enough for some of the cosplay pieces I need, and some I can sell.

Powered by Yahoo! Answers