3D printer is being built. This past weekend, I mostly morally assisted my husband while he worked on fitting the 3D printer parts. Most of the hardware parts are together, and the computer parts remain to be finished.
Can’t test print my item, YET, but hopefully very soon. In the mean time, I’m working on something that he requested for his project.
I’ve done some virtual sets for work, but I haven’t really attempted to make something from existing plans. The virtual sets tend to be 3-walled rather than four, and single room, or implied single room only. Final renders with lighting and textures were needed, of course, but the structure of the room itself wasn’t all that important. I also feel a little rusty since no one at work has wanted or requested a new virtual set in a while.
Here are one of the preview plans that my husband and I rejected for our future house building adventures. As you can see from the linked page, the plans are not complete. It seems to not be showing the light house like tower as a separate plan, but that shouldn’t be a problem. As an exercise, potentially for the plans we do settle on, I’m going to see if I can replicate the house in Lightwave. I’ll likely populate it with free table and other household objects, since plenty of those already exist online and there’s not much point in spending time on chairs and say, curtains.
If it all works out, there will be two final versions of the house project. One project will have furniture and lighting and be rendered. The other will be empty and suitable for 3D printing in blocks.
China recently made the news with 3D printing components of houses. This kind of put a little bug in my brain about possibly doing 3D printed mini-houses in a compartment manner so they can either be assembled or snapped together in boxes.
Tweak mesh: check
Reize mesh to 4 inches/101 mm: check
Added posts to help keep stable while printing: check
Subdivide for density: check
Make all triangles: check
Rotate so it builds flat: check
Exported in a printable format: check
I’ve updated the object so none of the leaves are overlapping. Everything is now on one single layer, but I may have to break it up again for 3D printing, I don’t know yet, but I hope I only have to add some posts to the back that can be broken or cut off to support the leaves and arches while printing. The leaves and vines are now partially attached to each other in back, also for printing support and for physical support, since there are so many free floating tendrils.
I don’t know when I’ll be able to do a test print, but hopefully soon!
I’m also going to have to make the mesh denser, it’s currently in ‘smooth’ mode with fewer polys than it looks.
In other news, Tandy leather no longer carries any grey suede, except for the super expensive lambskin hides, so I’m either going to have to go internet hunting and hope I can find enough of the same color and quality to make the chase dress, or I’ll have to just suck it up and go with a thick micro or ultra suede. I’d prefer to have my own real leather outfit, but reasonable pricing tends to win over perfect material. Or it does when I’d have to get $500 worth or lambskin.
One of the costumes I have on my “to-do” list is the “Chase” dress worn by Arwen in the Lord of the Rings movies. A very helpful person has already gone through and done every bit of necessary research I could ever think of.
The belt buckle on the costume is huge and delicate, and I cannot currently cast metal objects. It seems like a good candidate for a 3D printer item. I used a sketch someone else had made as a basis for modeling the belt buckle in Lightwave.
Starting with this:
After about four hours, I’m here:
The bottom-most leaves are slightly asymmetrical, and I’m going to modify the top set of leaf/wings to also be a little asymmetrical as well. I want to capture the feel of something hand made once it’s printed, and not completely perfect. The only thing I want to look exactly symmetrical are the long upper and lower half-loops. The belt buckle will tie on the sides with ribbon.
At the moment, some of the leaves are overlapping on each other, and I’ll have to fix that before exporting as a printable object. I’m also going to tighten the raised ridges on the half loops to make them more distinct. I’m going to have to experiment with the leaf thickness to see if it’ll be strong enough once printed. I may also glue a wire to the back loops to reinforce them if they seem wobbly.
So, sometime in the past, News 14 asked for a Gas Station sort of virtual set. The reporter that requested it wanted to be able to render out a short animation that showed the entire gas station from a distance and then zoomed into the pump. My boss okayed the project, and then never told me to stop working on it after I finished what the reporter asked for. For a few extra weeks between other projects, I added a bunch of extra props to flesh out the scene. I added dumpsters modeled after the ones in our parking lot, a phone booth and air/vacuum pump, some basic shelves inside the store, wooden pallets, the ice machine, and a few other bits. They finally got around to telling me to stop working on it, or I would have flattened the curb in front of the store to make a wheelchair access, and improved the lighting rigs. I made or modified all the textures in Photoshop, and took some of the texture photos myself from a local gas station.
Close up of the pumps:
further back, older file but shows more.
A friend said she wanted to look more like Morgana, and took the original photo of herself at the Festival of Legends in Chapel Hill. I tweaked it for her, to look more like a specific character photo.
Meeting new people and running into current friends at like-minded festivals is always fun, but sometimes not as much fun as finding the photos later. I’ve known Paul Cory through con circles and other people, and I always love his work. He’s taken a few shots of me that I adore, so I’m a little biased. He’s always around North Carolina sci-fi and fantasy conventions, and sells sessions for reasonable fees.
I also wanted to show off the suede cloak.
About 2 weeks ago, that cloak started out as six pieces of soft pigskin suede. I used every single bit of it, with only tiny scraps left over. The cloak is patterned roughly after a fleece version that a company in UK sells. Their cloaks look hand-serged, and nice and full and flowy. My friend wanted one that was real leather suede, and through fortunate timing, we found a pile of it on sale at our local Tandy Leather store. We inspected and unrolled around 10 pieces and chose six that were closest matched in tone and color. I gleefully took them home, petted them, then hung them vertically to let the skins stretch naturally for a few days. I knew the cloak was going to be heavy, and it would stretch on its’ own and possibly pull any seams I had done if I didn’t let them hang first and pre-stretch.
I made one mockup of muslin following a simplicity pattern. We weren’t totally happy with the results, so I cut off the sleeves and skirt, and made a new bodice using McCall’s ‘snow white’ pattern. The sleeve holes were better fitted for movement, and I used the bodice pattern pieces 1-4 and the upper arm, cut in half along the upper curve, then cut the pieces so the top curved in and removed the need for any sleeve ease. You really don’t ever want to try to ease a leather sleeve. This bodice fit better under the arms and in front, and I was able to fit a hood to it and the existing bell sleeves and skirt with no problem.
The biggest change ended up being the fullness of the coat. The cloth mock-up had 8 panels, but we reduced it to 6, because a leather coat didn’t have to be as full as the dress pattern, and we would have had to buy another hide to fill it out.
The suede sewed together like a dream. I really didn’t expect it to just zip through my machine so well, even using my non-digital ‘heavy duty’ machine (I also own a digital machine and 2 sergers, and an embroidery machine). It was thick, but easy to work with, no worse than any other dense, slightly stretchy fabric. My machine does worse with vinyl and breaks more needles.
I learned something important while stitching embroidery on real leather suede. The sewing needle gets hot, very fast. I could only embroider around 6 inches at a time, and that was pressing my luck. I had to clean the needle regularly with nail polish remover. When it overheats, it melts the suede and the needle becomes sticky with seared animal proteins. The thread broke often, but not in ways that hurt the leather, and the Coats embroidery thread is working well so far. The leather is backed with non-fusible interfacing, then the extra was cut away after stitching. It took me 8 hours of sewing to embroider the middle back, sleeve back and shoulders. It will probably take me another 12 to do the bottom edges and front. Fortunately, I found that I can prop open my laptop and have re-runs of Buffy running on Amazon Prime. I have to stop often to clean and let the needle cool off every five minutes anyway, so it was a nice distraction.
I’ve only used about 3-4 leather needles so far, which is pretty good, considering. I have more embroidering to do on the cloak, but I got as much done as I promised I could within a 2 week period. My customer is thrilled with her product.
How To Train Your Dragon 2 is coming out in a few months, and I think I need to make something that’s going to be too warm to wear in June.
The first HTYD movie was wonderful and my husband and I both bawled at the end. I still can’t watch the damn thing without crying. Toothless grew on me fast – his style threw me off at first, but the animation of his expressions and body movements and especially the eyes won me over fast. My favorite dragons have traditionally been D&D versions, with strong, well defined bodies and distinct shining scales. I’m still annoyed that Smaug is technically a Wyvern rather than a dragon – his arms are build into the wings rather than as another set of limbs. Back to topic: last year, I made this Toothless for my nephew:
Toothless was partially completed on the plane to New Zealand and during the first few days of travel. He was finished in time to pose for photos on the South Island near the Franz-Josef glacier. Which we got some good shots of, but our helicopter ride was canceled at the last minute due to weather, so we never actually got to go set foot on it. That would have been my first helicopter trip ever too. Ah well. This Toothless was delivered over Christmas, and apparently has not left my nephew’s side since. He was put together following a free pattern by “KatyA” on DeviantArt. The pattern can be found here – http://katy-a.deviantart.com/art/Toothless-Pattern-Part-1-of-4-161986741 It is NOT released for commercial purposes, so I can’t make more of these for sale, only personal use.
Which leads me to this = Toothless Dragon Hoodie
This dragon hoodie, on the other hand has no released pattern, but I suspect I can bastardize a few pieces of the DA pattern, or at least blow up the tail portion for the hoodie. It is done by a Canadian company, and it simply looks amazing. I’m plotting on doing my own, and I don’t know at this point if I’m going to make the whole thing from scratch or purchase 2 hoodies and scavenge tail, claw, wing and horn material from one of them. I found a few base designs that I like – I prefer the ‘slim’ fit style, and I found a hoodie on ebay with a double zipper style that I would like to use as a base. If I go the buy and modify route, I’d need two of the same style hoodie, maybe one the largest size they carry so I can harvest the bigger one for material. I like the diagonal seam across the front and would like to try drafting a pattern with raglan sleeves, and the lower pockets as in the ebay example (not the front pouch that most hoodies seem to have). I also like the draw string hood, so I’ll use that as well. I don’t like the puffy arms as much, however, so I don’t know if I’ll keep those as part of my design. I think that would make it different enough for me to sell if I don’t.
Using 2 hoodies – I have matching material, but it may not be enough. having a base to start with could, in theory, save me some time but I’ve become wary of ‘time saving’ shortcuts. It would be nice to not have to go through the whole fitting process though.
Using hoodie fabric – I can do my own design, make a pattern of my own (and in theory, digitize and sell that) but it will take extra time to do everything. On the other hand, I’ll have fabric to burn, and I can pick fabric that I can be sure won’t be too bulky with the added tail and whatnot. There are advantages to being able to make another one, say for my nephew, with fabric I can buy readily.
Either way, I’ll need some black fabric paint and maybe a nice stencil for clean paint edges. I know for sure I”ll be doing a half-red tail with the viking symbol instead of all black like the one for sale. I’d like to do my own design and sell it – perhaps a Smaug hoodie for sale instead of a Toothless, so I don’t risk stepping on the other shop’s figurative toes. My own Toothless hoodie will have the center back wing spines as well as seven pointed flappy wings rather than the four points that the already existing hoodie has.
Tumblr is easier to update on a regular basis, so here it is!
I’m up to 63, I think.